Stewart & Stevenson Power Products LLC · Electronic Components
TYPER50-8
Resistor, Variable, Wire Wound, Non
Part NumberTYPER50-8
ManufacturerStewart & Stevenson Power Products LLC
AvailabilityAvailable to order — request a quote
Specifications
NSN5905-00-660-3518 (NSN)
Federal Item NameRESISTOR,VARIABLE,WIRE WOUND,NON
Federal Supply Class5905 — Resistors
Shaft StyleROUND, FLATTED
Flat Height0.219 INCHES NOMINAL
Body Diameter0.938 INCHES NOMINAL
Ambient Temp In Deg Celsius Per Se55.0 SINGLE SECTION
Terminal Type And Quantity3 TAB, SOLDER LUG
Actuator Travel Control FeatureCLUTCH
Power Dissipation Rating Per Secti50.0 FREE AIR SINGLE SECTION
Resistance Tolerance Per Section I-10.0 TO 10.0 SINGLE SECTION
Device Design TypeAT 3:00 OCLOCK AND AT 6:00 OCLOCK AND AT 9:00 OCLOCK AND AT 12:00 OCLOCK LOCATION NOT OTHERWISE SPECIFIED
Screw Thread Diameter0.375 INCHES NOMINAL
Reliability IndicatorNOT ESTABLISHED
Vendor Part Numbers205SCREWDRIVERSL0TSHAFT, K50-8
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is TYPER50-8 available?
We can source TYPER50-8 even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is TYPER50-8 by Stewart & Stevenson Power Products LLC obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If TYPER50-8 has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like TYPER50-8?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for TYPER50-8?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.