● ISO 9001:2015 · ANSI/ESD S20.20-2021 · ERAI Member · GIDEP · Woman-Owned Small Business 760.724.2800 · 855.RH.HAS.IT · info@rhelectronics.com
Home / Catalog / MIL-SPEC / RA30NASD752E
MIL-SPEC  · Electronic Components

RA30NASD752E

Resistor, Variable, Wire Wound, Non

Part NumberRA30NASD752E
ManufacturerMIL-SPEC
AvailabilityAvailable to order — request a quote

Specifications

Federal Item NameRESISTOR,VARIABLE,WIRE WOUND,NON
Federal Supply Class5905 — Resistors
Maximum Starting Torque6.00 INCH-OUNCES
Actuator Travel Control FeatureSTOPS
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Resistance Tolerance Per Section I-10.0 TO 10.0 SINGLE SECTION
Power Dissipation Rating Per Secti2.2 FREE AIR SINGLE SECTION
Terminal Length0.425 INCHES MAXIMUM
Mounting Bushing Length0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
Shaft Length0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM
Mounting MethodSTANDARD BUSHING
Nonturn Device Radius0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
Screw Thread Diameter0.375 INCHES NOMINAL
ESD/EMICode B — ESD/EMI sensitive item
Review your list (0) →
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant

Frequently asked

Is RA30NASD752E available?
We can source RA30NASD752E even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is RA30NASD752E by MIL-SPEC obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If RA30NASD752E has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like RA30NASD752E?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for RA30NASD752E?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.