Marine Electric Systems Inc. · Electronic Components
PMP200-D
Resistor, Variable, Wire Wound, Non
Part NumberPMP200-D
ManufacturerMarine Electric Systems Inc.
AvailabilityAvailable to order — request a quote
Specifications
NSN5905-00-108-5891 (NSN)
Federal Item NameRESISTOR,VARIABLE,WIRE WOUND,NON
Federal Supply Class5905 — Resistors
Reliability IndicatorNOT ESTABLISHED
Power Dissipation Rating Per Secti2.0 FREE AIR ALL SECTIONS
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Ambient Temp In Deg Celsius Per Se40.0 ALL SECTIONS
Device Design TypeAT 9:00 OCLOCK LOCATION NOT OTHERWISE SPECIFIED
Electrical Resistance Per Section200.0 OHMS ALL SECTIONS
Terminal Type And Quantity6 TAB, SOLDER LUG
Shaft StyleROUND, SLOTTED
Actuator Travel Control FeatureSTOPS
Resistance Tolerance Per Section I-10.0 TO 10.0 ALL SECTIONS
Body Length1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is PMP200-D available?
We can source PMP200-D even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is PMP200-D by Marine Electric Systems Inc. obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If PMP200-D has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like PMP200-D?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for PMP200-D?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.