TE Connectivity · Electronic Components
PD-CAP-1/8-0
Insulation Sleeving, Electrical, S
Part NumberPD-CAP-1/8-0
ManufacturerTE Connectivity
LifecycleStocked
AvailabilityAvailable to order — request a quote
Specifications
NSN5970-00-827-0830 (NSN)
Federal Item NameINSULATION SLEEVING,ELECTRICAL,S
Federal Supply Class5970 — Electrical Insulators
Temp Rating-55.0 CELSIUS AND 110.0 CELSIUS
Style DesignatorBOOT-STRAIGHT
MaterialPLASTIC POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED
Minimum Tensile Strength2000 POUNDS PER SQUARE INCH
ColorBLACK
Main Body Large End Inside Diamete0.023 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
FlexibilitySEMIRIGID
Main Body Wall Thickness0.048 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
Main Body Overall Length0.870 INCHES NOMINAL AS SUPPLIED
Dielectric Material Voltage Rating600.0 VOLTS PER MIL /0.001 INCH/
Large End Wall Thickness Of Main B0.048 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
Vendor Part Numbers338086-1
RohscompliantYES
I D Supplied Metric3.18 mm
Hazardousfalse
RohsphthalatescompliantYES
I D Recovered Max Metric0.58 mm
Product RangePD Series
Shrink Tubing Boot ColourBlack
Total Length Metric25.4 mm
IscanonicalY
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is PD-CAP-1/8-0 available?
We can source PD-CAP-1/8-0 even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is PD-CAP-1/8-0 by TE Connectivity obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If PD-CAP-1/8-0 has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like PD-CAP-1/8-0?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for PD-CAP-1/8-0?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.