SAE International · Electronic Components
M20708/8-01C
Synchro, Transmitter
Part NumberM20708/8-01C
ManufacturerSAE International
AvailabilityAvailable to order — request a quote
Specifications
NSN5990-00-924-4164 (NSN)
Federal Item NameSYNCHRO,TRANSMITTER
Federal Supply Class5990 — Synchros and Resolvers
Body StyleSTANDARD ROUND C
Overall Length2.3560 INCHES NOMINAL
Shoulder Diameter0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
Undercut Diameter0.9750 INCHES NOMINAL
Flange Thickness0.0930 INCHES NOMINAL
Pilot Diameter0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
Undercut Width0.0620 INCHES NOMINAL
Flange Diameter1.0570 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM
Test Data Document81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DA
Spline Tooth Diametral Pitch120 SINGLE SHAFT
Alignment Hole Depth0.1250 INCHES MINIMUM
Vendor Part Numbers450900-9243-3
Cancelled NSN5990-00-859-8702 (cancelled)
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is M20708/8-01C available?
We can source M20708/8-01C even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is M20708/8-01C by SAE International obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If M20708/8-01C has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like M20708/8-01C?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for M20708/8-01C?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.