Microwave Engineering · Electronic Components
J170-1006
Waveguide Assembly
Part NumberJ170-1006
ManufacturerMicrowave Engineering
AvailabilityAvailable to order — request a quote
Specifications
NSN5985-01-082-2573 (NSN)
Federal Item NameWAVEGUIDE ASSEMBLY
Federal Supply Class5985 — Antennas and Waveguides
Flange Depth0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM ALL FLANGES
Tubing Wall Construction StyleSEAMLESS SINGLE TUBING SEGMENT
Flange Connecting Hole Diameter0.196 INCHES MINIMUM AND 0.200 INCHES MAXIMUM ALL FLANGES ALL CONNECTION FACILITIES
Flange Outside Height1.920 INCHES MINIMUM AND 1.960 INCHES MAXIMUM ALL FLANGES
Flange Quantity2
Voltage Standing Wave Ratio1.10
Flange Outside Width2.670 INCHES MINIMUM AND 2.710 INCHES MAXIMUM ALL FLANGES
Waveguide Inside Width1.368 INCHES MINIMUM AND 1.376 INCHES MAXIMUM
Flange StyleCONTACT TYPE ALL FLANGES
Operating Pressure45.0 POUNDS PER SQUARE INCH GAUGE (PSIG) MAXIMUM
Waveguide Length7.500 INCHES NOMINAL
Vendor Part NumbersSM-A-569581-8
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is J170-1006 available?
We can source J170-1006 even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is J170-1006 by Microwave Engineering obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If J170-1006 has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like J170-1006?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for J170-1006?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.