Ohmite Holding · Electronic Components
CU2511
Resistor, Variable, Nonwire Wound,
Part NumberCU2511
ManufacturerOhmite Holding
AvailabilityAvailable to order — request a quote
Specifications
NSN5905-00-683-2898 (NSN)
Federal Item NameRESISTOR,VARIABLE,NONWIRE WOUND,
Federal Supply Class5905 — Resistors
Shaft Length2.000 INCHES NOMINAL
Body Length0.625 INCHES NOMINAL
Device Design TypeNONTURN AT 9:00 OCLOCKUNABLE TO DECODE
Screw Thread Quantity Per Inch32.0
Nonturn Device Radius0.531 INCHES NOMINAL
Terminal Type And Quantity3 TAB, SOLDER LUG
Resistance Tolerance Per Section I-10.0 TO 10.0 SINGLE SECTION
Mounting MethodSTANDARD BUSHING
Electrical Resistance Per Section250.000 OHMS SINGLE SECTION
Screw Thread Series DesignatorUNEF
Screw Thread Diameter0.375 INCHES NOMINAL
Vendor Part NumbersJA1N200P251UZ
ESD/EMICode A — ESD/EMI sensitive item
ProducttraceabilityNo
RohscompliantYES
IscanonicalY
Hazardousfalse
RohsphthalatescompliantYES
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is CU2511 available?
We can source CU2511 even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is CU2511 by Ohmite Holding obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If CU2511 has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like CU2511?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for CU2511?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.