Powers Holdings · Electronic Components
CDM3
Terminal Board
Part NumberCDM3
ManufacturerPowers Holdings
AvailabilityAvailable to order — request a quote
Specifications
NSN5940-00-752-5706 (NSN)
Federal Item NameTERMINAL BOARD
Federal Supply Class5940 — Lugs, Terminals, and Terminal Strips
Terminal Pattern ArrangementMULTI-ROW
Board ConstructionHOLLOW CONSTRUCTION WITHOUT INSULATED STRIP
Nonfeedthru Terminal Type858 SINGLE
Board Overall Height1.250 INCHES
MaterialPLASTIC PHENOLIC BOARD
Distance Between Terminal Row Cent1.000 INCHES
Board Overall Length3.281 INCHES
Center To Center Distance Between0.500 INCHES
Mounting Slot Width0.219 INCHES
Body StyleBARRIER TYPE
Distance From Bottom Edge Of Termi0.250 INCHES
Cancelled NSN5940-00-356-2503 (cancelled)
Overall Width11.500 INCHES NOMINAL
Measurement Range+1.5 TO 500.0 MICROSIEMENS SINGLE INDICATOR FIRST RANGE
Scale Selection MethodSWITCH
Operating Voltage Rating In Volts110.0 AC MINIMUM AND 220.0 AC MAXIMUM
Style DesignatorRECTANGULAR OR SQUARE
Movement Suspension MethodTAUT BAND
Surface TreatmentPAINT
Installation DesignPANEL OR BENCH
Overall Height8.750 INCHES NOMINAL
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is CDM3 available?
We can source CDM3 even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is CDM3 by Powers Holdings obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If CDM3 has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like CDM3?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for CDM3?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.