Ohmite Holding · Electronic Components
4210
Resistor, Variable, Wire Wound, Non
Part Number4210
ManufacturerOhmite Holding
AvailabilityAvailable to order — request a quote
Specifications
NSN5905-00-927-2780 (NSN)
Federal Item NameRESISTOR,VARIABLE,WIRE WOUND,NON
Federal Supply Class5905 — Resistors
Shaft Length0.875 INCHES NOMINAL
Shaft StyleROUND, FLATTED
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Terminal Type And Quantity3 TAB, SOLDER LUG
Resistance Tolerance Per Section I-10.0 TO 10.0 SINGLE SECTION
Actuator Travel Control FeatureSTOPS
Ambient Temp In Deg Celsius Per Se40.0 SINGLE SECTION
Power Dissipation Rating Per Secti50.0 FREE AIR SINGLE SECTION
Device Design TypeAT 6:00 OCLOCK LOCATION NOT OTHERWISE SPECIFIED
Body Diameter2.312 INCHES NOMINAL
Actuator TypeSINGLE SHAFT
Lamp Quantity For Which Designed1
Terminal TypeSOLDER TAB
Frequency Rating40.0 HERTZ MINIMUM AND 1.2 KILOHERTZ MAXIMUM
Controlled Circuit Quantity1
Furnished ItemsOPERATING MECHANISM ENCLOSURE
Flashing Rate6 PER MINUTE MINIMUM AND 300 PER MINUTE MAXIMUM
AdjustabilityNONADJUSTABLE
Terminal Quantity4
Ac Voltage Rating12.0 VOLTS MINIMUM AND 115.0 VOLTS MAXIMUM
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is 4210 available?
We can source 4210 even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is 4210 by Ohmite Holding obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If 4210 has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like 4210?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for 4210?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.