Dynalec Corporation · Electronic Components
4046
Resistor, Variable, Wire Wound, Non
Part Number4046
ManufacturerDynalec Corporation
AvailabilityAvailable to order — request a quote
Specifications
NSN5905-00-259-9750 (NSN)
Federal Item NameRESISTOR,VARIABLE,WIRE WOUND,NON
Federal Supply Class5905 — Resistors
Body Diameter1.094 INCHES NOMINAL
Body Length0.515 INCHES NOMINAL
Device Design TypeAT 3:00 OCLOCK OR AT 6:00 OCLOCK OR AT 9:00 OCLOCK OR AT 12:00 OCLOCK LOCATION NOT OTHERWISE SPECIFIED
First Flat Length0.375 INCHES NOMINAL
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Resistance Tolerance Per Section I-10.0 TO 10.0 SINGLE SECTION
Reliability IndicatorNOT ESTABLISHED
Terminal Type And Quantity3 TAB, SOLDER LUG
Shaft Diameter0.250 INCHES NOMINAL
Mounting Bushing Length0.375 INCHES NOMINAL
Nonturn Device Radius0.500 INCHES NOMINAL
Dielectric Withstanding Voltage In6500.0
Adhesive LocationONE SIDE
Cut Type And Quantity1 SINGLE
Nominal Length1296.0 INCHES
Nominal Overall Thickness0.0105 INCHES
Nominal Width2.000 INCHES
Adhesive TypePRESSURE SENSITIVE
Temp Rating-80.0 CELSIUS MINIMUM AND 288.0 CELSIUS MAXIMUM
MaterialRUBBER IMPREGNATION
Material Document And ClassificatiSILASTIC,DOW CORNING CORP MFR REF SINGLE MATERIAL RESPONSE OVERALL
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is 4046 available?
We can source 4046 even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is 4046 by Dynalec Corporation obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If 4046 has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like 4046?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for 4046?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.