Memcor Inc. · Electronic Components
4005
Resistor, Variable, Wire Wound, Non
Part Number4005
ManufacturerMemcor Inc.
AvailabilityAvailable to order — request a quote
Specifications
NSN5905-00-221-8111 (NSN)
Federal Item NameRESISTOR,VARIABLE,WIRE WOUND,NON
Federal Supply Class5905 — Resistors
Flat Height0.344 INCHES NOMINAL
Shaft StyleROUND, FLATTED
Screw Thread Diameter0.250 INCHES NOMINAL
Body StyleCYLINDRICAL HOLE/SLOT MOUNTED
First Flat Length0.440 INCHES NOMINAL
Rotary Actuator Travel In Angular310.0 NOMINAL
Mounting MethodTHREADED HOLE(S)
Electrical Resistance Per Section3.0 OHMS SINGLE SECTION
Ambient Temp In Deg Celsius Per Se340.0 SINGLE SECTION
Terminal Type And Quantity3 TAB W/SCREW
Resistance Tolerance Per Section I-10.0 TO 10.0 SINGLE SECTION
Vendor Part Numbers1252P225W3M0D, 13216E8649
Winding Operating Voltage10.00 AC VOLTS NOMINAL SINGLE COMPONENT FIRST SECONDARY
Inclosure TypeFULLY INCLOSED
Body Length1.050 INCHES MAXIMUM
Reliability IndicatorNOT ESTABLISHED
Winding Function And Quantity1 PRIMARY AND 2 SECONDARY SINGLE COMPONENT
Input Output Phase RelationshipSINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT
Body Width0.813 INCHES MAXIMUM
Frequency Rating400.0 HERTZ NOMINAL SINGLE COMPONENT
Body Height0.685 INCHES MAXIMUM
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is 4005 available?
We can source 4005 even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is 4005 by Memcor Inc. obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If 4005 has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like 4005?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for 4005?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.