Ab Electronic · Electronic Components
3001-9S1T10
Resistor, Variable, Wire Wound, Pre
Part Number3001-9S1T10
ManufacturerAb Electronic
AvailabilityAvailable to order — request a quote
Specifications
NSN5905-00-132-3513 (NSN)
Federal Item NameRESISTOR,VARIABLE,WIRE WOUND,PRE
Federal Supply Class5905 — Resistors
Shaft Length0.625 INCHES NOMINAL
Body Length0.750 INCHES NOMINAL
Screw Thread Quantity Per Inch32.0
Section Quantity1
Screw Thread Diameter0.375 INCHES NOMINAL
Mounting MethodSTANDARD BUSHING
Electrical Resistance Per Section1.000 OHMS SINGLE SECTION
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Resistance Tolerance Per Section I-10.0 TO 10.0 SINGLE SECTION
Power Dissipation Rating Per Secti3.0 FREE AIR SINGLE SECTION
Test Data Document10296-3001-9S1T10 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFAC
Vendor Part Numbers1209760, CLR3001/9S/1R0K
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is 3001-9S1T10 available?
We can source 3001-9S1T10 even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is 3001-9S1T10 by Ab Electronic obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If 3001-9S1T10 has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like 3001-9S1T10?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for 3001-9S1T10?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.