Keystone Electronics · Electronic Components
1961
STANDOFF M/F HEX 8-32 1.25"L BRS
Part Number1961
ManufacturerKeystone Electronics
AvailabilityAvailable to order — request a quote
Specifications
NSN5999-00-460-0767 (NSN)
Federal Item NameSHIELDING GASKET,ELECTRONIC
Federal Supply Class5999 — Miscellaneous Electrical Components
Center To Center Distance Between1.563 INCHES NOMINAL
Surface TreatmentSILVER EMI/RFI CONDUCTOR
MaterialCOPPER EMI/RFI CONDUCTOR
Precious Material And LocationTHROUGHOUT RF SHIELDING GASKET SILVER
Precious MaterialSILVER
Hole Diameter0.203 INCHES NOMINAL
Aperture Diameter1.750 INCHES NOMINAL
Overall Width2.000 INCHES NOMINAL
Outside Corner Radius0.219 INCHES NOMINAL
Outside Edge To Bolt Hole Center D0.219 INCHES NOMINAL
Overall Length2.000 INCHES NOMINAL
ESD/EMICode A — ESD/EMI sensitive item
Thread Series DesignatorUNEF SINGLE MOUNTING FACILITY
Contact Switching ActionBREAKS BEFORE MAKES EACH SECTION REAR
Shaft Diameter0.245 INCHES MINIMUM AND 0.249 INCHES MAXIMUM SINGLE ACTUATOR
Switch Actuator Indexing Position3 SINGLE ACTUATOR
First Flat Length0.250 INCHES NOMINAL SINGLE ACTUATOR
Shaft Flat Slot Angular Location0.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR
Hazardous Locations EnvironmentalEXPLOSION PROOF
Switch Contact Basic DesignNONPILE-UP SYMMETRICAL
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is 1961 available?
We can source 1961 even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is 1961 by Keystone Electronics obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If 1961 has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like 1961?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for 1961?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.