Keysight Technologies · Electronic Components
130C
Oscilloscope
Part Number130C
ManufacturerKeysight Technologies
AvailabilityAvailable to order — request a quote
Specifications
NSN6625-00-069-5477 (NSN)
Federal Item NameOSCILLOSCOPE
Federal Supply Class6625 — Test Instruments
Screen Size5.000 IN.
Mounting MethodRACK
Sweep Circuit TypeHORIZONTAL AND VERTICAL
FSC Application DataOSCILLOSCOPES,EXCEPT SPECIALLY DESIGNED
Amplitude Calibrating Voltage WaveSQUARE WAVE
Visual Blanking Sensitivity Voltag20.0 VOLTS NOMINAL
Visual Modulation Sensitivity Volt2.0 VOLTS NOMINAL
Trigger Sweep Voltage Amplitude Ra10.0 VOLTS NOMINAL
Calibrating Peak To Peak Amplitude10.0 MILLIVOLTS NOMINAL
Vertical Deflection Sensitivity Vo0.5 VOLTS MINIMUM RMS PER INCH AND 50.0 VOLTS MAXIMUM RMS PER INCH
Single Trigger Sweep Duration500.0 SECONDS NOMINAL
Frequency Range2.000 GIGAHERTZ MINIMUM AND 10.000 GIGAHERTZ MAXIMUM
Power Rating1.0 WATTS AVERAGE
Terminal Type And Quantity2 CONNECTOR
Body StyleROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
Application DesignTRANSMISSION LINE
Overall Diameter0.812 INCHES NOMINAL
Overall Length8.312 INCHES NOMINAL
Rf Signal Attenuation In Decibels10.0
Output Impedance Rating In Ohms50.0
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is 130C available?
We can source 130C even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is 130C by Keysight Technologies obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If 130C has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like 130C?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for 130C?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.