Whitmor Plastic Wire & Cable · Electronic Components
1101-1-J
Insulation Sleeving, Electrical, S
Part Number1101-1-J
ManufacturerWhitmor Plastic Wire & Cable
AvailabilityAvailable to order — request a quote
Specifications
NSN5970-01-046-9853 (NSN)
Federal Item NameINSULATION SLEEVING,ELECTRICAL,S
Federal Supply Class5970 — Electrical Insulators
Distance From Centerline Of Small1.150 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
Main Body Small End Inside Diamete1.730 INCHES MINIMUM AS SUPPLIED
Minimum Tensile Strength600 POUNDS PER SQUARE INCH
Material Document And ClassificatiRT-602,RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
Distance From Intersecting Centerl2.110 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
Main Body Large End Inside Diamete1.080 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
Height1.730 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
FlexibilityFLEXIBLE
Distance From Top Of Shoulder To S0.680 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
Angle Between Large End And Small180.0 NOMINAL AS SUPPLIED
Style DesignatorBOOT-90 DEGREES
Vendor Part Numbers222A163-6
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is 1101-1-J available?
We can source 1101-1-J even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is 1101-1-J by Whitmor Plastic Wire & Cable obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If 1101-1-J has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like 1101-1-J?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for 1101-1-J?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.