Naval Ship Systems Command · Electronic Components
10434
Magnet, Permanent
Part Number10434
ManufacturerNaval Ship Systems Command
AvailabilityAvailable to order — request a quote
Specifications
NSN5999-00-257-3559 (NSN)
Federal Item NameMAGNET,PERMANENT
Federal Supply Class5999 — Miscellaneous Electrical Components
Overall Height5.500 INCHES NOMINAL
Surface TreatmentLACQUER
MaterialALUMINUM ALLOY
ShapeU
Air Gap Width1.500 INCHES
Mounting ConfigurationFOUR0.266 INCH DIA MTG HOLES ON 2.000 IN. BY 7.875 IN.MTG CENTERS
Overall Length8.375 INCHES NOMINAL
Usage DesignUSED TO OPERATE MAGNETRON TUBE
Overall Width2.500 INCHES NOMINAL
Flux Density1825.000 GAUSS NOMINAL
Face Size1.625 INCHES DIA
Vendor Part NumbersDVG120-5003PT3
Reliability IndicatorNOT ESTABLISHED
Body Length2.188 INCHES NOMINAL
Nonderated Continuous Voltage Rati400.0 DC SINGLE SECTION
Schematic Diagram DesignatorELECTRODE(S) GROUNDED TO CASE
Body Diameter1.000 INCHES NOMINAL
Capacitance Value Per Section9.000 MICROFARADS SINGLE SECTION
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM
Center To Center Distance Between1.375 INCHES NOMINAL
Terminal Length0.250 INCHES NOMINAL
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is 10434 available?
We can source 10434 even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is 10434 by Naval Ship Systems Command obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If 10434 has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like 10434?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for 10434?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.