Lockheed Martin Corp. · Electronic Components
10056
Resistor, Variable, Wire Wound, Non
Part Number10056
ManufacturerLockheed Martin Corp.
AvailabilityAvailable to order — request a quote
Specifications
NSN5905-00-883-0424 (NSN)
Federal Item NameRESISTOR,VARIABLE,WIRE WOUND,NON
Federal Supply Class5905 — Resistors
Shaft StyleROUND, SLOTTED
Shaft Diameter0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
Mounting MethodTERMINAL AND UNTHREADED HOLE(S)
Electrical Resistance Per Section3.0 KILOHMS SINGLE SECTION
Center To Center Distance Between0.100 INCHES NOMINAL
Ambient Temp In Deg Celsius Per Se105.0 SINGLE SECTION
Rotary Actuator Travel In Angular9000.0 NOMINAL
Actuator TypeSINGLE SHAFT
Temp Coefficient Of Resistance Wir-20.0 TO 20.0 SINGLE SECTION
Terminal Type And Quantity3 PIN
Power Dissipation Rating Per Secti0.5 FREE AIR SINGLE SECTION
Identical Value Resistor Quantity1 SIXTH INTERMEDIATE RESISTANCE VALUE
Electrical Resistance10.000 KILOHMS LOWEST RESISTANCE VALUE
Terminal Quantity16
Terminal TypeTAB, SOLDER LUG
Style DesignatorDUAL INLINE
Body Length0.830 INCHES NOMINAL
Inclosure MethodENCASED
Body Height0.200 INCHES NOMINAL
Body Width0.325 INCHES NOMINAL
Reliability IndicatorNOT ESTABLISHED
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is 10056 available?
We can source 10056 even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is 10056 by Lockheed Martin Corp. obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If 10056 has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like 10056?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for 10056?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.