Avo Intl · Electronic Components
10011-2
Resistor, Fixed, Wire Wound, Induct
Part Number10011-2
ManufacturerAvo Intl
AvailabilityAvailable to order — request a quote
Specifications
NSN5905-00-473-2656 (NSN)
Federal Item NameRESISTOR,FIXED,WIRE WOUND,INDUCT
Federal Supply Class5905 — Resistors
Resistance Tolerance In Percent-3.000 TO 3.000
Terminal Length1.500 INCHES NOMINAL
Ambient Temp At Full Rated Power125.0 CELSIUS
Body Width0.281 INCHES MAXIMUM
Ambient Temp In Deg Celsius At Zer175.0
Power Dissipation Rating In Watts0.125 FREE AIR
Body Height0.063 INCHES MAXIMUM
Body Length2.312 INCHES MAXIMUM
Inclosure TypeENCAPSULATED
Terminal TypeWIRE LEAD
Temp Coefficient Of Resistance In-50.0 TO 50.0
ESD/EMICode A — ESD/EMI sensitive item
Tolerance Range Per Section-10.00 TO 10.00 PERCENT SINGLE SECTION
Capacitance Value Per Section0.0065 MICROFARADS SINGLE SECTION
Nonderated Operating Temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM
Terminal Type And Quantity2 UNINSULATED WIRE LEAD
Insulation Resistance At Reference10000.0 MEGOHM-MICROFARADS
MaterialPLASTIC CASE
Terminal Surface TreatmentSOLDER
Dissipation Factor At Reference Te1.000
Terminal Diameter0.025 INCHES NOMINAL
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is 10011-2 available?
We can source 10011-2 even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is 10011-2 by Avo Intl obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If 10011-2 has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like 10011-2?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for 10011-2?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.