Vernitron Corp. VRN International Div · Electronic Components
1000-500OHMS
Resistor, Variable, Wire Wound, Pre
Part Number1000-500OHMS
ManufacturerVernitron Corp. VRN International Div
AvailabilityAvailable to order — request a quote
Specifications
NSN5905-00-104-8400 (NSN)
Federal Item NameRESISTOR,VARIABLE,WIRE WOUND,PRE
Federal Supply Class5905 — Resistors
Body Diameter1.000 INCHES NOMINAL
Function Characteristic Per SectioSINGLE SECTION LINEAR
Tap Location Tolerance Per Section-5.0 TO 5.0 OHMS SINGLE SECTION
Terminal Type And Quantity3 TURRET
Fixed Tap Quantity Per Section1 SINGLE SECTION
Power Dissipation Rating Per Secti4.0 FREE AIR SINGLE SECTION
Device Design TypeAT 9:00 OCLOCK
Ambient Temp In Deg Celsius Per Se40.0 SINGLE SECTION
Actuator TypeSINGLE SHAFT
Maximum Stop Torque2.00 INCH-OUNCES
Effective Electrical Rotation In D3600.0 NOMINAL
Vendor Part NumbersGR816AF501
RH Electronics, Inc. — independent stocking distributor since 1982.
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Every shipment inspected on receipt · ISO 9001:2015 · ANSI/ESD S20.20 · ERAI member since 1998 · GIDEP participant
Frequently asked
Is 1000-500OHMS available?
We can source 1000-500OHMS even if it isn't in our active stock list. As an independent distributor we reach inventory outside the franchise channel — including hard-to-find and obsolete parts. Send us a quote request.
Is 1000-500OHMS by Vernitron Corp. VRN International Div obsolete or end-of-life?
We specialize in obsolete, end-of-life, and discontinued components. If 1000-500OHMS has been discontinued, we can often source remaining stock or qualified alternates. Contact us with your quantity and target date.
How does RH Electronics verify parts like 1000-500OHMS?
Every incoming shipment is inspected under our ISO 9001:2015 quality system — documentation, markings, and construction checked against known-good references. For deeper analysis, we direct work through accredited independent labs. We've been an ERAI member since 1998 and a GIDEP participant.
Can you find a cross-reference or alternate for 1000-500OHMS?
Yes. Our team reads part numbers the way they were designed — decoding family, speed, temperature grade, package, and reliability level — to identify acceptable alternates when the exact part isn't available. Submit a quote request and we'll advise.